Rozhen (1735.2 m asl), Pluvio2L [raw]
|
|
+0 = Precipitation gauge working properly +1 = W: Bucket level 80 % +2 = W: USB interface is/was connected +4 = W: Restart (due to power failure) +8 = W: Restart (due to firmware) +16 = W: Weight change out of range +32 = W: Supply voltage < 7 V +64 = A: Weight measurement unstable +128 = A: Weight measurement incorrect +256 = A: Weight below minimum +512 = A: Weight above maximum +1024 = A: No weight calibration W = warning; A = alarm. |
|
+0 = Orifice rim heater working properly +1 = W: Temp. of orifice ring rim > 40 °C +2 = A: Temp. of orifice ring rim < —20 °C +4 = A: Temperature sensor not connected +8 = A: Temperature sensor short-circuited +16 = A: Communication to rim heater module is defective (the pipe hous-ing may have been removed) +32 = A: Orifice rim heater self-test failed +64 = W:Orifice rim heater temporarily disabled +128 = W:Orifice rim heater disabled or not present W = warning; A = alarm. |
To the extent possible under law, Atanas Terziyski has waived all copyright and related or neighbouring rights to METER.AC.